On 19 February 2025, APulsar Technologies Sdn. Bhd. hosted another successful Delta Partner Enablement Event. The event highlighted Delta Electronics’ latest advancements and fostered meaningful discussions on energy storage and data center solutions.
On 10th December 2024, APulsar Technologies hosted the Delta Partner Enablement Workshop, a transformative gathering where bold ideas met actionable strategies, paving the way for the future of technology and collaboration.
On 10th October 2024, APulsar Technologies collaborated with Fortinet Malaysia to organize a successful Fortinet NGFW Fast Track Workshop for TNB Genco.
On Wednesday, 25th September 2024, APulsar Technologies hosted the Delta Partner Enablement Event, a platform designed to foster collaboration and drive innovation in the rapidly evolving technology landscape.
The DMZ is the “buffer” between these two networks, reducing the likelihood of direct interaction between the enterprise network (or the Internet) and the industrial network. Physically, the DMZ might be implemented using a separate VLAN or isolated network segment, managed by industrial routers and firewalls.
Cybersecurity 101: A secure network infrastructure relies on a reliable defense-in-depth strategy. Discover how to construct layered network protection with our approach. Our secure networking solution offers a complete approach to ramp up your industrial network security.
With increasing demands on OT/IT integration, data security is at the forefront of our concerns more than ever. In fact, according to an IDC survey, security is considered the top barrier to OT/IT integration.
Intercake was established in 2004 to develop a new cake printing system for all sizes of retail outlets. The company is based in Co. Wicklow, Ireland. Intercake has a range of products available to suit any size business, from large grocery retailers to individual stores and has a presence in over 400 supermarkets across the UK and Ireland.
This innovative concept has produced unheralded commercial success as a bolt-on in the retail sector.
Increased Connected Devices. According to a survey by IDC, around 40% of the respondents will invest in automation to digitalize their industrial operations.*
For businesses that want to get the most out of their data at field sites to improve operational efficiency, OT/IT convergence is the way forward. However, most industrial equipment uses serial interfaces as they have been a reliable and cost-effective option for system communication in the past decades.
I/O modules are used to connect various sensors, counters and other terminal devices to control and monitoring systems. Moxa has a fairly extensive line of I/O devices.
Moxa’s MGate MB3270 and MB3660 Modbus gateways can be used to convert Modbus RTU to Modbus ASCII (serial redirection). If two devices are separated by a long distance, protocol conversion can be achieved by coupling two MGates using an Ethernet connection.
Step 1: To update the NPort firmware, run the NPort Administrator utility. Right-click on the NPort and select the Upgrade Firmware option to start the firmware upgrade.
Step 1: Follow the Software & Documentation page on the Moxa website. Enter the name of the series, click Search, and then in the Firmware tab, download the firmware for your model.
Devices powered by the computer’s RS-232 port are powered by the Tx, RTS, and DTR lines. In general, the cable length should not exceed 15 meters at a speed of 9600bps. If you use a longer cable length, the transmitted power may not be enough to power the device.
To increase the reliability and extend the life of the power supply. We suggest using a power supply with a 30% power reserve. For example, if the device consumes 100W, then it is better to choose a power supply of 130W or more.
MOXA devices use the standard RS-485 interface pinout for the DB9 Male connector.
Hello 👋 Can we help you?
Open chat
Apulsar.com uses cookies to ensure you get the best experience. By continuing to browse, you agree to our use of cookies. Our privacy policy available here