Resources

Visit us on 5 -7 May at Malaysia’s premier expo for metalworking, robotics, and industrial automation.
Moxa AWK-1137C an entry-level industrial Wi-Fi 4 (802.11n) wireless clients.
APulsar's webinar recording on Collaborative Robots Technologies from January 2026.
The InHand IoT Edge Gateway bridges the gap between industrial field equipment and the cloud.
The Neousys POC-600 is a rugged, DIN-rail fanless PC with Intel Atom x7425E, edge AI support, and robust I/O built for industrial environments.
Neousys Nuvo-11531 Series Review: Powerful Edge AI in a Compact, Fanless Package
The Neousys Nuvo-10109GC is a rugged fanless edge AI platform supporting 600W NVIDIA RTX Blackwell GPUs with up to 4,000 AI TOPS.
The InHand EC312 is an industrial LoRaWAN gateway supporting up to 2,000 nodes over 15 km, with 4G/Wi-Fi backup.
Visit us on 5 -7 May at Malaysia’s premier expo for metalworking, robotics, and industrial automation.
APulsar's webinar recording on Collaborative Robots Technologies from January 2026.
Visit us on 14–17 May at Malaysia’s premier expo for metalworking, robotics, and industrial automation.
APulsar Technologies Dobot Training at Monash University
Dobot Robotics demo-kits at ICC UTM MOU 2025 featured by APulsar.
Perodua Digital Month exhibition 2025 - APulsar Technologies exhibitor demo-kit showcase ATOM Humanoid Robot (DOBOT)
APulsar Technologies – Official Eaton Direct Reseller in Malaysia
Watch APulsar's METALTECH & AUTOMEX 2025 session on Dobot cobots: ROI benefits, real-world applications, and critical cybersecurity insights.
The DMZ is the “buffer” between these two networks, reducing the likelihood of direct interaction between the enterprise network (or the Internet) and the industrial network. Physically, the DMZ might be implemented using a separate VLAN or isolated network segment, managed by industrial routers and firewalls.
Cybersecurity 101: A secure network infrastructure relies on a reliable defense-in-depth strategy. Discover how to construct layered network protection with our approach. Our secure networking solution offers a complete approach to ramp up your industrial network security.
With increasing demands on OT/IT integration, data security is at the forefront of our concerns more than ever. In fact, according to an IDC survey, security is considered the top barrier to OT/IT integration.
Intercake was established in 2004 to develop a new cake printing system for all sizes of retail outlets. The company is based in Co. Wicklow, Ireland. Intercake has a range of products available to suit any size business, from large grocery retailers to individual stores and has a presence in over 400 supermarkets across the UK and Ireland. This innovative concept has produced unheralded commercial success as a bolt-on in the retail sector.
Increased Connected Devices. According to a survey by IDC, around 40% of the respondents will invest in automation to digitalize their industrial operations.*
For businesses that want to get the most out of their data at field sites to improve operational efficiency, OT/IT convergence is the way forward. However, most industrial equipment uses serial interfaces as they have been a reliable and cost-effective option for system communication in the past decades.
How to choose your MOXA UPort USB-to-Serial with APulsar's Selection Guide.
How to choose your MOXA NPort with our Selection Guide.
I/O modules are used to connect various sensors, counters and other terminal devices to control and monitoring systems. Moxa has a fairly extensive line of I/O devices.
Moxa’s MGate MB3270 and MB3660 Modbus gateways can be used to convert Modbus RTU to Modbus ASCII (serial redirection). If two devices are separated by a long distance, protocol conversion can be achieved by coupling two MGates using an Ethernet connection.
Step 1: To update the NPort firmware, run the NPort Administrator utility. Right-click on the NPort and select the Upgrade Firmware option to start the firmware upgrade.
Step 1: Follow the Software & Documentation page on the Moxa website. Enter the name of the series, click Search, and then in the Firmware tab, download the firmware for your model.
Devices powered by the computer’s RS-232 port are powered by the Tx, RTS, and DTR lines. In general, the cable length should not exceed 15 meters at a speed of 9600bps. If you use a longer cable length, the transmitted power may not be enough to power the device.
MOXA devices use the standard RS-232 pinout for the DB9 Male connector.
To increase the reliability and extend the life of the power supply. We suggest using a power supply with a 30% power reserve. For example, if the device consumes 100W, then it is better to choose a power supply of 130W or more.
MOXA devices use the standard RS-485 interface pinout for the DB9 Male connector.