Resources

What is DMZ, and Why is It Important for Your Industrial Network?

The DMZ is the “buffer” between these two networks, reducing the likelihood of direct interaction between the enterprise network (or the Internet) and the industrial network. Physically, the DMZ might be implemented using a separate VLAN or isolated network segment, managed by industrial routers and firewalls.

Defense-in-depth Security Architecture

Cybersecurity 101: A secure network infrastructure relies on a reliable defense-in-depth strategy. Discover how to construct layered network protection with our approach. Our secure networking solution offers a complete approach to ramp up your industrial network security.

HARDWARE FAQ “MOXA INDUSTRIAL SWITCHES”

Unmanaged – A switch without management features. It is used when it is necessary to combine several Ethernet devices into a single system. Moxa unmanaged switches are presented in seriesEDS-200, EDS-300 andEDS-2000.

How to connect a Modbus RTU device to an Ethernet network?

This option requires an MGate protocol converter. You can use the Modbus TCP protocol to communicate with Modbus RTU devices through the gateway. There are many ” Modbus gateways ” available in the automation market that provide Modbus TCP connectivity for Modbus TCP slaves. When the gateway receives a Modbus TCP request, it converts the packet to Modbus RTU and immediately sends it to the Modbus RTU devices.

Explore benefit of the second generation of MOXA's USB-to-Serial Converters.
The Neousys POC-900 is a fanless DIN-rail embedded PC powered by AMD Ryzen PRO with a 31 TOPS AI NPU, built for edge AI.
Neousys' new Nuvo-11501 fanless PC with AI capabilities and the IP67-rated POC-766AWP for automation in harsh environments.
How to choose your MOXA UPort USB-to-Serial with APulsar's Selection Guide.
Industrial Control Cabinet Guide: MOXA Network & Edge Connectivity Solutions
MOXA has launched the new MGate MB3x70 Gen 2 Series. See the key upgrades and how they differ from the previous generation.
Visit us on 14–17 May at Malaysia’s premier expo for metalworking, robotics, and industrial automation.
APulsar Technologies Dobot Training at Monash University