APulsar Technologies Sdn Bhd will showcase practical factory automation at the FMM Smart Manufacturing Conference 2026 on Thursday, 26 November 2026, at One World Hotel, Petaling Jaya. The conference centres on the theme “AI-Powered Smart Manufacturing: Transforming Industry for Next-Gen Competitiveness” (view the full programme).
As an active FMM member since 2018 (Membership No. A0505) and a recognised Strategic Partner under Mission-Based Project (MBP) 2.1 — an initiative dedicated to transforming 3,000 Smart Factories in Malaysia by 2030 — APulsar will lead a technical speaking session and run two live collaborative robot (cobot) demonstration cells: our proprietary robotic palletising system and a vision-guided intelligent welding cell presented with partner Leeden Sdn Bhd.
Speaking Session: Finding the Right Automation Scale for Malaysian Manufacturing
APulsar Technologies leads Session 5 of the afternoon conference track.
- Session: S5 — Cobots, Robotics, and Humanoids: Finding the Right Automation Scale for Malaysian Manufacturing
- Date: Thursday, 26 November 2026
- Time: 3:30 PM – 4:00 PM
- Venue: One World Hotel, Petaling Jaya
Session Abstract
This session evaluates emerging industrial technologies — including Artificial Intelligence, Physical AI, and Humanoid Robotics — and their practical integration into regional manufacturing environments. The discussion will address common operational challenges faced by Malaysian enterprises, such as “High Mix, Low Volume” production demands, legacy workflow integration, and high capital expenditure (CAPEX) barriers.
By evaluating the operational trade-offs between traditional industrial robots, cobots, and humanoids, the session identifies immediate, practical automation deployments for palletising and welding tasks designed to enhance throughput, worker safety, and process repeatability.
About the Speaker
Vincent brings 8 years of specialised experience in industrial automation, machine vision systems, and robotic integration. Throughout his career, he has collaborated with global technology providers to design and deploy automated systems tailored to the real-world production constraints of Malaysian factories.
Live Demo Kits: See Smart Automation in Action
Throughout the conference, attendees are invited to visit the APulsar demonstration zone to view live interactive cobot applications, test SafeSkin contactless protection in person, and discuss a custom ROI calculation for their production lines with technical specialists.
1. Robotic Palletising Demo Kit (by APulsar Technologies)
The palletising cell features the DOBOT CR20A collaborative robot arm (20 kg maximum payload, 1,700 mm working radius, ±0.05 mm repeatability) operating in a live box-stacking configuration built for high-throughput end-of-line operations in FMCG, F&B, and electronics.
Key features of our Robotic Palletising Solutions include:
- Zero Safety Fences: Equipped with SafeSkin contactless detection and a 5-level collision detection system, enabling safe operation in shared human-robot workspaces while reducing floor space requirements by up to 50% compared to traditional caged robots.
- Flexible Multi-Pattern Switching: Supports complex interlocking stacking patterns and stores up to 20 different templates, allowing operators to switch between product lines with just a few clicks.
- Consistent Throughput & Fast ROI: Capable of handling 8–9 boxes per minute using single suction grippers or up to 12–13 boxes per minute with dual suction setups. In 24/7 production settings, typical return on investment (ROI) is achieved within 8 to 10 months.
2. 2.5D Vision Guided Intelligent Welding System (in Partnership with Leeden Sdn Bhd)
Presented in collaboration with welding solution provider Leeden Sdn Bhd, this cell demonstrates how vision-guided robotic welding maintains consistent weld quality on variable workpieces across metal fabrication and automotive components without requiring complex manual teaching.
- DOBOT Robot Arm: The DOBOT CR10A (CRA series 6-axis cobot, 10 kg payload, 1,300 mm reach, ±0.03 mm repeatability) running the dedicated DOBOT Welding Application Process Package.
- Vision System: The DOBOT VX500 Smart Camera (5-megapixel CMOS sensor with integrated LED lighting) utilising 2.5D spatial compensation technology (±0.26 mm accuracy) to locate parts and automatically adjust weld paths.
- Welding Power Source: The Kemppi AX MIG Welder, an industrial-grade robotic MIG/MAG power source engineered for continuous, high-precision arc welding.
- Cobot Welding Torch: The Kemppi Flexlite GXe-C, a specialised cobot MIG torch designed for robotic alignment and torch geometry stability.
You will see how these devices work together to bridge legacy and modern equipment, streamline field-level connectivity, and keep your industrial networks running reliably.
Join Us at FMM Smart Manufacturing Conference 2026
We invite conference delegates, partners, and manufacturing professionals to attend Vincent Hoy’s presentation at 3:30 PM and observe the live demonstrations of the DOBOT CR20A palletising unit and the 2.5D vision-guided welding system.
To participate, please Register for FMM Smart Manufacturing Conference 2026 through the official FMM portal. If you have already registered, bring your box dimensions or welded part specifications and book a 1-on-1 meeting with APulsar’s technical team on-site.
Get in touch!
We have a lot of ways to communicate. Just send us a WhatsApp message or an old-school e-mail using buttons below. Our managers will reply to you within one working day.
And if you would like to see more product news like this one, don’t forget to subscribe to our newsletter below!