VPort 464 Series

Features and Benefits

  • Each channel supports 2 D1 30 fps streams simultaneously, or merge 1 quad stream 30 fps image into 4 channels
  • Video latency under 200 ms
  • 2 Ethernet ports for cascading or Ethernet port redundancy
  • DynaStream™ for optimized network efficiency
  • ONVIF support for standardization and interoperability
  • Local storage capability with microSD card slot
  • Industrial design with -40 to 75°C operating temperature

Available to Order

Models

  • VPort 464
  • VPort 464-T

Overview

How to Buy

Click “WhatsApp Us” or “Get a Quote” above to buy VPort 464 Series from APulsar Technologies, MOXA official distributor.

Purchase walk-in from our office in Petaling Jaya, or order online and enjoy fast delivery across Kuala Lumpur and the entire Malaysia.

Introduction

The VPort 464 4-channel industrial video encoder uses the H.264 video compression algorithm to provide the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various requirements, each channel of the VPort 464 can support 2 video streams simultaneously or you can merge all 4 channels into 1 quad view stream using H.264 and MJPEG compression formats, providing greater flexibility for a variety of uses, including viewing, recording, and analysis. The rugged industrial design, which includes a -40 to 75°C operating temperature, IP30 protection, and industrial certifications, make the VPort 464 suitable for harsh environments.

The VPort 464 comes with two Ethernet ports and supports cascade mode and network redundancy. In addition, Moxa’s innovative DynaStream™ technology lets you change the video frame rate automatically, allowing you to control your network bandwidth budget and simplify network system management. The CBR Pro™ function guarantees the lowest packet loss for limited bandwidth transmissions to ensure that images will not exhibit the mosaic effect.

Specifications

Memory

microSD Slot

  • SDXC

Digital Input Channels

  • 4

Digital Inputs

  • +13 to +30 V for state 1
  • -30 to +1 V for state 0
  • Max. input current: 8 mA

Relay Channels

  • 2

Contact Current Rating

  • Resistive load: 1 A @ 24 VDC

Connector

  • Terminal block

10/100BaseT(X) Ports (RJ45 connector)

  • 2

Protocols

  • TCP/IP
  • IPv4/IPv6
  • UDP
  • HTTP
  • RTP/RTSP
  • ARP
  • UPnP
  • FTP
  • TFTP
  • NTP Client
  • DNS
  • QoS
  • IGMP v3
  • ICMP
  • SNMPv1/v2c/v3
  • Modbus TCP
  • HTTPS
  • 802.1X
  • NTCIP

Password

  • User-level password protection

Filter

  • IP address

Authentication

  • 802.1X

Encryption

  • HTTPS
  • SSH

LED Indicators

  • STAT: Indicates if system is booted up properly or not
  • Power 1: Power 1 on/off
  • Power 2: Power 2 on/off
  • FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
  • Video: Video input signal
  • PTZ: Indicates if PTZ or COM port data has been transmitted
  • SD: Indicates if SD card was mounted successfully
  • Network: 10 Mbps or 100 Mbps

PTZ Port

  • 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps

COM Port

  • 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps

Console Port

  • 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)

No. of Power Inputs

  • 2

Input Voltage

  • Redundant dual inputs

Operating Voltage

  • 12 to 32 VDC, 18 to 30 VAC

Input Current

  • 1 A @ 12 VDC
  • 0.3 A @ 32 VDC
  • 0.92 A @ 18 VAC
  • 0.56 A @ 30 VAC

Power Connector

  • 2-pin terminal block

Video Compression

  • H.264 (ISO/IEC 14496-10) or MJPEG

Video Input

  • 4, BNC connector (1.0 Vpp, 75 ohm)

Video Output

  • via Ethernet

Video Streams

  • 2 independent H.264 or MJPEG video streams
  • 1 quad (4-channel images) stream

NTSC/PAL

  • Auto-sensing or manual

Video Resolution and FPS (frames per second)

NTSC PAL
Size Max. FPS Size Max. FPS
QCIF 176 x 112 30 176 x 144 25
4CIF 704 x 480 30 704 x 576 25
CIF 352 x 240 30 352 x 288 25
VGA 640 x 480 30 640 x 480 25
QVGA 320 x 240 30 320 x 240 25
Full D1 720 x 480 30 720 x 576 25
Quad View 1440 x 960 30 1440 x 1152 25

Video Viewing

  • DynaStream™ support for changing the video frame rate automatically
  • CBR Pro™ for good image quality in limited bandwidth transmissions
  • Adjustable image size and quality
  • Timestamp and text overlay
  • OSD (On Screen Display) position adjustable
  • Maximum of 10 simultaneous unicast connections, 50 multicast clients
  • Image tuning control: brightness, contrast, saturation, sharpness, noise reduction

Audio Inputs

  • 1 Line-in or MIC-in with 3.5 mm phone jack

Audio Outputs

  • 1 Line-out, with 3.5 mm phone jack

Audio Format

  • Mono, PCM (G.711)

Video Standards

  • ONVIF Profile S

PTZ Camera Control

  • Via PTZ port or COM port

PTZ Control Functions

  • Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)

PTZ Function Updates

  • Driver upload supported

Protocols

  • Pelco D, Pelco P, Custom Camera

Intelligent Video

  • Camera tampering detection

Video Motion Detection

  • 3 independently configurable areas

Scheduling

  • Daily repeat timing schedule

Imaging

  • JPEG snapshots for pre/trigger/post alarm images

Custom Alarms

  • HTTP event servers for setting customized alarm actions

FTP Messaging

  • Automatic transfer of stored images via FTP as event-triggered actions

Pre-Alarm Buffer

  • 50 MB video buffer for JPEG snapshot images

Video Recording

  • Event recordings stored on the SD card

Memory Size

  • 1 GB

Operating System

  • Windows 7 or above

Browser

  • Internet Explorer 9.x or above

Multimedia

  • DirectX 9.0C or above

Housing

  • Metal

Dimensions

  • 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)

Weight

  • 1130 g (2.49 lb)

Installation

  • DIN-rail mounting
  • Wall mounting (with optional kit)

Operating Temperature

  • Standard Models: -25 to 60°C (-13 to 140°F)
  • Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

  • -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Altitude

  • 2000 m

Time

  • 827,831 hrs

Standards

  • Telcordia SR332

EMI

  • CISPR 32, FCC Part 15B Class A

EMS

  • IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
  • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
  • IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
  • IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
  • IEC 61000-4-6 CS: 10 V
  • IEC 61000-4-8 PFMF

Freefall

  • IEC 60068-2-31

Safety

  • UL 60950-1

Shock

  • IEC 60068-2-27

Vibration

  • IEC 60068-2-6