EDR-G9004 Series

Homepage > Moxa > Industrial Network Infrastructure > Network Security Appliance > EDR-G9004 Series

Features and Benefits

4-port Gigabit all-in-one firewall/NAT/VPN/router
Gen3 LAN Bypass for system fault tolerance
Dual WAN redundant interfaces through public networks
Industrial-grade Intrusion Prevention/Detection System (IPS/IDS)
Visualize OT security with the MXsecurity management software
Secure remote access tunnel with VPN
Examine industrial protocol data with Deep Packet Inspection (DPI) technology
Easy network setup with Network Address Translation (NAT)
Developed according to IEC 62443-4-2 with Secure Boot
-40 to 75°C operating temperature range (-T model)

Overview

The EDR-G9004 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-treat systems in water stations, distributed control systems in oil and gas applications, and PLC/SCADA systems in factory automation. Furthermore, with the addition of IDS/IPS, the EDR-G9004 Series is an industrial next-generation firewall, equipped with threat detection and prevention capabilities to further protect critical infrastructure from cybersecurity attacks.

Defend Against Malicious Threats With Advanced Cybersecurity Features

The EDR-G9004 Series’ embedded firewall uses policy rules to control network traffic between trusted zones while Network Address Translation (NAT) shields the internal network from unauthorized access by outside hosts. The Virtual Private Networking (VPN) functionality further provides users with secure communication tunnels when accessing the private network from the public Internet. To help protect your OT assets from cyberattacks, the EDR-G9004 Series supports Deep Packet Inspection (DPI) to examine the data portion of network packets for various OT-specific protocols.

Simplify Configurations With the User-friendly Interface and Quick Settings

The EDR-G9004 Series’ Setup Wizard provides an easy way for users to set up DMZ ports to create a secure network buffer zone in just three steps. In addition, the object-based firewall management feature gives engineers a simple way to configure and maintain firewall filtering for IP addresses and subnets, network services, industrial application services, and user-defined services.

Industrial-grade Design to Ensure Uninterrupted Network Connectivity

The EDR-G9004 Series’ rugged hardware makes these secure routers ideal for harsh industrial environments, featuring wide-temperature models that are built to operate reliably in hazardous conditions and extreme temperatures of -40 up to 75°C. Moreover, the EDR-G9004 Series supports WAN, Layer 3 redundancy mechanisms, and Gen3 LAN Bypass fault tolerance to ensure that your network stays connected at all times.

Virtual Patching and Intelligent Threat Protection

Patching remains a major challenge in OT environments because OT applications cannot afford interrupting operations by shutting down systems to apply patches. Virtual patching technology can help complement existing patch management processes by shielding known and unknown vulnerabilities. In addition, the EDR-G9004 features intelligent IPS functionality for continuous protection against cyberthreats which uses pattern-based detection to identify and block known attacks.

MX-ROS Addresses Growing Cybersecurity Threats

Moxa’s MX-ROS (https://www.moxa.com/en/spotlight/portfolio/mx-ros/index) is a software platform for industrial security routers and firewalls. The platform supports the robust security and user-friendly operation of secure routers through simplified web and CLI interfaces. In addition to adhering to IEC 62443-4-2, MX-ROS devices offer a wealth of the latest cross-industry Operational Technology (OT) network management features with each release to safeguard hardware and software.

Specifications

Input/Output Interface

Digital Inputs

+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA

Alarm Contact Channels

Resistive load: 1 A @ 24 VDC

Buttons

Reset button

Ethernet Interface

10/100/1000BaseT(X) Ports (RJ45 connector)

2 (with Gen3 LAN Bypass)

Combo Ports (10/100/1000BaseT(X) or 1000/2500BaseSFP)

DMZ

Supports DMZ port

Standards

IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control

Ethernet Software Features

Management

Back Pressure Flow Control
DDNS
DHCP Server/Client
Web Console (HTTP/HTTPS)
LLDP
SNMPv1/v2c/v3
Telnet
TFTP
HTTPS
SSH

Routing Throughput

Max. 350K packets per second / 2 Gbps (based on RFC 2544)

Routing Table

Max. 4K routing rules

Concurrent Connections

Max. 400K (based on RFC 3511)

Connections Per Second

Max. 20K (based on RFC 3511)

Routing Redundancy

VRRP

Security

Secure Boot
IPsec
L2TP (server)
RADIUS
TACACS+
Trust access control
SCP
SFTP
NTP authentication
Syslog Authentication

Time Management

NTP Server/Client
SNTP

Multicast Routing

Static Route

Unicast Routing

OSPF
RIPV1/V2
Static Route

LED Interface

LED Indicators

PWR1, PWR2, STATE, BYPASS, WAN/DMZ, VRRP/HA, VPN, USB

DoS and DDoS Protection

Technology

ARP-Flood
FIN Scan
ICMP Flood
TCP Sessions Without SYN
NMAP-ID Scan
NMAP-Xmas Scan
Null Scan
SYN/FIN Scan
SYN/RST Scan
SYN-Flood
Xmas Scan

Firewall

Filter

DDoS
Ethernet protocols
ICMP
IP address
MAC address
Ports

Stateful Inspection

Router firewall
Transparent (bridge) firewall

Deep Packet Inspection

Modbus TCP
Modbus UDP
DNP3
IEC 60870-5-104
IEC 61850 MMS
EtherNet/IP
MELSEC
Omron FINS
OPC UA
Siemens S7 Comm.
Siemens S7 Comm. Plus

Additional protocols will be supported through future firmware updates.

Intrusion Prevention System

Requires an additional license.

Throughput

Firewall:
Max. 350K packets per second / 2 Gbps (based on RFC 2544)
IPS:
Max. 200K packets per second / 2 Gbps (based on RFC 2544)

IPsec VPN

Authentication

MD5 and SHA (SHA-512)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 certificate

Concurrent VPN Tunnels

Max. 250 IPsec VPN tunnels

Encryption

DES
3DES
AES-128
AES-192
AES-256
AES-256-GCM

Protocols

IPsec
L2TP (server)
PPTP (client)

Throughput

Conditions: AES-256, SHA-256
Max. 100K packets per second / 800 Mbps (based on RFC 2544)

NAT

Features

1-to-1
N-to-1
NAT loopback
Port forwarding

Real-time Firewall Event Log

Event Type

Firewall event
VPN event

Media

Local storage
SNMP Trap
Syslog server

Serial Interface

Console Port

RS-232 (TxD, RxD, GND)
3-pin (115200, n, 8, 1)

Connector

USB Type-C

Power Parameters

Connection

Removable terminal block

Input Voltage

12/24/48 VDC (DNV certified)
Redundant dual inputs

Operating Voltage

9.6 to 60 VDC

Input Current

1.01 A @ 12 VDC
0.51 A @ 24 VDC
0.27 A @ 48 VDC

Reverse Polarity Protection

Supported

Physical Characteristic

Housing

Metal

IP Rating

IP40

Dimensions

45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)

Weight

800 g (1.76 lb)

Installation

DIN-rail mounting
Wall mounting (with optional kit)

Environmental Limits

Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Standard and Certifications

Safety

IEC 62368-1
UL 62368-1

EMC

EN 55032/35

EMI

CISPR 32, FCC Part 15B Class A

EMS

IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF

Railway

EN 50121-4

Shock

IEC 60068-2-27

Freefall

IEC 60068-2-32

Vibration

IEC 60068-2-6

MTBF

Time

1,876,185 hrs