All your home appliances, lighting, central air conditioning, and heating, can be powered sufficiently after the installation of the Huawei Smart Module Controller. Each panel can work to deliver their maximum power, unaffected by partial shading and module failure, and achieve accelerated power generation and higher yields.
*The maximum power of PV module at STC shall NOT exceed the “Rated Input DC Power” of the power optimizer. PV modules with up to +5% power tolerance are allowed.
**Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.
***Once the power optimizer stops working, its output voltage is reduced to 0 V.
****It is for PV module frame/extruded aluminum profile racking system installation.
*****When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature alarm. After the temperature decreases, it can automatically resume working without causing any damage.
Note:
SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy / PV Controller
Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage conditions, and environmental factors.
