AIG-302 Series

Features and Benefits

  • Supports generic MQTT client to facilitate MQTT connections via built-in device SDKs tailored for Azure cloud integration
  • Supports Modbus RTU/ASCII/TCP client
  • Supports Modbus TCP server
  • Supports Azure IoT Edge
  • Built-in network traffic monitoring and diagnostic tool for easy troubleshooting
  • Provides robust OTA function to prevent system failure during software upgrades
  • Equipped with Secure Boot to prevent malicious software-injection attacks
  • -40 to 70°C operating temperature range
  • LTE Cat. 4 US, EU, and APAC models available

Models

  • AIG-302-T-EU-AZU-LX
  • AIG-302-T-US-AZU-LX
  • AIG-302-T-AP-AZU-LX
  • AIG-302-T-AZU-LX

Overview

How to Buy

Click “WhatsApp Us” or “Get a Quote” above to buy AIG-302 from APulsar Technologies, MOXA official distributor.

Purchase walk-in from our office in Petaling Jaya, or order online and enjoy fast delivery across Kuala Lumpur and the entire Malaysia.

Introduction

The AIG-302 Series advanced IIoT gateways connect Modbus RTU/ASCII/TCP devices to platforms such as Azure cloud and MQTT. The gateways support the Modbus TCP server mode, enabling simultaneous transmission of data to cloud platforms and your local SCADA system.

Boost Edge Computing Capabilities With Azure IoT Edge

AIG-302 supports Azure IoT Edge to bring in a multitude of benefits, including edge computing capabilities, reduced bandwidth costs, flexibility and scalability, seamless integration with Azure services, and ease of management and update. Specifically, with the AIG-302 processing data locally, it not only offers rapid responses and low latency but also effectively reduces network bandwidth usage, thereby cutting costs. Additionally, the modular design of the AIG-302 and Azure IoT Edge support make your system both flexible and easily expandable. At the same time, its seamless integration with Azure cloud services allows you to effortlessly extend cloud capabilities to edge devices.

Built-in Ready-to-use Data Preprocessing Functions, No Coding Required

Energy Management Systems collect energy data such as average power generation and energy efficiency. This data is then used to display on-site conditions, observe the energy trend, and optimize energy usage. Most energy management systems require meaningful data and hence edge gateways are expected to preprocess data collected at field sites before transfer to cloud applications. Some applications may require certain actions to be performed within a short time frame on the preprocessed data. AIG-302 ready-to-run IIoT gateways come with value-added functions and an intuitive UI that simplify data preprocessing and distributed device management to just a few clicks.

Secure Remote Access Reduces Maintenance Costs

The AIG-302 comes with powerful troubleshooting tools to diagnose issues with protocol statuses and capture and analyze traffic packets, enabling engineers to identify the root cause of issues and quickly bring the operation back to normal. Moreover, AIG-302 provides secure remote access allowing maintenance engineers to fix issues remotely, saving time and effort as well as reducing the downtime in energy management systems. External connections can be encrypted using OpenVPN or TLS, ensuring secure communication.

Security Dashboard Optimized for Detecting Security Issues

A security dashboard utilizes device scans to identify potential cybersecurity threats from multiple angles, such as during account settings management, application networking, application resource usage monitoring, product certificates deployment, service settings modifications, and system status checks. Upon detecting threats, a mitigation plan is recommended to resolve issues.

Appearance

AIG-302-T US, EU, AP Models

AIG-302-T-AZU-LX

Specifications

Computer

CPU

  • Armv7 Cortex-A7 dual-core 1 GHz

DRAM

  • 2 GB DDR3L

Storage Pre-installed

  • 32 GB eMMC

Pre-installed OS

  • Moxa Industrial Linux (Debian 11, kernel 5.10.x)

No. of Tags Supported

  • 3000

Ethernet Ports

  • Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 2

Serial Ports

  • RS-232/422/485 ports x 2 (software-selectable, DB9 male connector)

CAN Ports

  • CAN 2.0 A/B x 1 (DB9 male)

Digital Input

  • DIs x 4

Digital Output

  • DOs x 4

USB 2.0

  • USB 2.0 hosts x 1, type-A connectors

Wi-Fi Antenna Connector

  • RP-SMA x 2 (excluding AIG-302-T-AZU-LX)

Cellular Antenna Connector

  • SMA x 2 (excluding AIG-302-T-AZU-LX)

GPS Antenna Connector

  • SMA x 1 (excluding AIG-302-T-AZU-LX)

Expansion Slots

  • mPCIe slots x 1 (excluding AIG-302-T-AZU-LX)

SIM Format

  • Nano

(excluding AIG-302-T-AZU-LX)

Number of SIMs

  • 2

Buttons

  • Reset button
  • Reset to factory default

TPM

  • TPM v2.0

Magnetic Isolation Protection

  • 1.5 kV (built-in)

10/100/1000BaseT(X) Ports (RJ45 connector)

  • 2

Industrial Protocols

  • Modbus TCP Client/Server
  • Generic MQTT
  • Azure IoT Device
  • Azure IoT Edge

Configuration Options

  • Web Console (HTTP/HTTPS)
  • AIG QuickON

Time Management

  • NTP Server/Client
  • GPS

Security

  • OpenVPN Client,
  • SSH
  • HTTPS/SSL
  • TLS
  • Firewall

No. of Ports

  • 2

Connector

  • DB9 male

Baudrate

  • 300 bps to 921.6 kbps

Data Bits

  • 7, 8

Stop Bits

  • 1, 2

Parity

  • None, Even, Odd, Space, Mark

Flow Control

  • RTS/CTS, XON/XOFF

Console Port

  • 1 x 4-pin header

RS-232

  • TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

  • Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

  • Data+, Data-, GND

Industrial Protocols

  • Modbus RTU/ASCII Master

No. of Ports

  • 1

Connector

  • DB9 male

Baudrate

  • 10 to 1000 kbps

Industrial Protocols

  • CAN 2.0A
  • CAN 2.0B

Signals

  • CAN_H, CAN_L, CAN_GND, CAN_SHLD, CAN_V+, GND

Isolation

  • 2 kV (built-in)

Connector

  • Spring-type Euroblock terminal

Sensor Type

  • Wet contact (NPN)
  • Dry contact

Dry Contact

  • Off: open
  • On: short to GND

Wet Contact (DI to COM)

  • On: 10 to 30 VDC
  • Off: 0 to 3 VDC

Isolation

  • 3K VDC

Connector

  • Spring-type Euroblock terminal

Current Rating

  • 200 mA per channel

I/O Type

  • Sink

Voltage

  • 24 VDC
  • nominal, open collector to 30 VDC

Cellular Standards

  • LTE Cat. 4

Band Options (US)

  • LTE Band 2 (1900 MHz) / LTE Band 4 (1700 MHz) / LTE Band 5 (850 MHz) / LTE Band 12 (700 MHz) / LTE Band 13 (700 MHz) / LTE Band 14 (700 MHz) / LTE Band 66 (1700 MHz) / LTE Band 71 (600 MHz)
  • UMTS/HSPA 850 MHz / 1900 MHz
  • Carrier Approval: Verizon, AT&T

Band Options (EU)

  • LTE Band 1 (2100 MHz) / LTE Band 3 (1800 MHz) / LTE Band 7 (2600 MHz) / LTE Band 8 (900 MHz) / LTE Band 20 (800 MHz)
  • UMTS/HSPA 900 MHz / 1800 MHz / 2100 MHz

Band Option (APAC)

  • LTE Band 1 (2100 MHz) / LTE Band 3 (1800 MHz) / LTE Band 5 (850 MHz) / LTE Band 8 (900 MHz) / LTE Band 28 (700 MHz)
  • UMTS/HSPA 850 MHz / 900 MHz / 2100 MHz

Versions Supported

  • v1.4.20

Authentication Methods

  • Manual / Connection String
  • DPS / Symmetric Encryption
  • DPS / X.509 Certificate
  • DPS / TPM

Azure Direct Methods

  • Reboot
  • Software Upgrade
  • Remote API Invocation

Azure Module Twin

  • Device Configuration

Moxa Functions

  • Custom Payload
  • Message Group

Versions Supported

  • v3.1.1
  • v3.1

QoS Levels

  • 0, 1, 2

Authentication Methods

  • Username and password

Secure Transmission

  • TLS 1.0
  • TLS 1.1
  • TLS 1.2

Native Capabilities

  • Keep Alive
  • Retain Message
  • Clean Session
  • Will and Testament

Moxa Functions

  • Store and Forward
  • Custom Payload
  • Remote API Invocation

Connection Protocols Supported

  • MQTT
  • MQTT over WebSockets
  • AMQP
  • AMQP over WebSockets

Authentication Methods

  • Symmetric Key
  • X.509 Certificate

Azure Direct Methods

  • Reboot
  • Software Upgrade
  • Remote API Invocation

Mode

  • Client

Functions Supported

  • 1, 2, 3, 4, 5, 6, 15, 16, 23

Max. No. of Commands

  • 256 per port

Max. No of Connected Devices

  • 62

Mode

  • Client/Server

Functions Supported

  • 1, 2, 3, 4, 5, 6, 15, 16, 23

Max. No. of Server Connections

  • 64

Max. No. of Client Connections

  • 4

Max. No. of Commands

  • 3000

No. of Power Inputs

  • Redundant dual inputs

Input Voltage

  • 12 to 48 VDC

Input Current

  • 1 A @ 12 VDC

Power Consumption

  • 12 W

Power Connector

  • 4-pin terminal block

System

  • Power x 2
  • User x 1
  • SIM card indicator x 1

LAN

  • 2 per port (10/100/1000 Mbps)

Wireless Signal Strength

  • Cellular/Wi-Fi x 6

No. of Power Inputs

  • Redundant dual inputs

Input Voltage

  • 12 to 48 VDC

Input Current

  • 1 A @ 12 VDC

Power Consumption

  • 12 W

Power Connector

  • 4-pin terminal block

Automatic Reboot Trigger

  • External WDT (watchdog timer)

Housing

  • Metal
  • SECC

IP Rating

  • IP30

Weight

  • AIG-302-T-AZU-LX: 560 g (1.23 lb)
  • All other models: 750 g (1.65 lb)

Dimensions

  • AIG-302-T-AZU-LX: 141.5 x 120 x 27 mm (5.7 x 4.72 x 1.06 in)
  • All other models: 141.5 x 120 x 39 mm (5.7 x 4.72 x 1.54 in)

Installation

  • DIN-rail mounting
  • Wall mounting (with optional kit)

Operating Temperature

  • AIG-302-T-AZU-LX: –40 to 85°C (-40 to 185°F)
  • All other models: -40 to 70°C (-40 to 158°F))

Storage Temperature (package included)

  • -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

  • 5 to 95% (non-condensing)

Shock

  • IEC 60068-2-27

Vibration

  • 2 Grms @ IEC 60068-2-64, random wave, 5 to 500 Hz, 1 hr per axis (without USB devices attached)

EMC

  • EN 55032/35
  • EN 61000-6-2/-6-4

EMI

  • CISPR 32, FCC Part 15B Class A

EMS

  • IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
  • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  • IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
  • IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV
  • IEC 61000-4-6 CS: 10 V
  • IEC 61000-4-8 PFMF

Cybersecurity

  • EN 18031-1

Hazardous Locations

  • Class I Division 2, ATEX

Safety

  • UL 62368-1
  • EN 62368-1

Radio

  • NCC
  • KC
  • RCM
  • TELEC

Carrier Approvals

  • AT&T
  • Verizon
  • PTCRB

RED

  • EN 301 489-1/19/52
  • EN 301 908-1
  • EN 303 413
  • EN 62311

Green Product

  • RoHS, CRoHS, WEEE

Time

  • AIG-302-T-AZU-LX: 1,772,745
  • All other models: 1,403,998

Standards

  • Telcordia (Bellcore) Standard TR/SR

Warranty Period

  • 5 years