Click “WhatsApp Us” or “Get a Quote” above to buy NPort 5100 Series (NPort 5110, NPort 5130, and NPort 5150) from APulsar Technologies, MOXA official distributor.
In Stock. Purchase walk-in from our office in Petaling Jaya. Or order online and enjoy fast delivery across Kuala Lumpur and the entire Malaysia.
NPort 5100 device servers instantly make serial devices network-ready. Their small size makes them ideal for connecting devices such as card readers and payment terminals to IP-based Ethernet LANs. Use NPort 5100 device servers to give your PC software direct access to serial devices from anywhere on the network.
Users now commonly use serial device servers to connect legacy serial devices to Ethernet. They expect device servers to be cost-effective and provide a broad selection of useful functions. The NPort 5100 Series fully supports Microsoft and Linux operating systems and includes a solid 5-year warranty. This combination provides the best choice for serial-to-Ethernet converters.
Critical environments may need termination resistors to prevent serial signal reflection. When using termination resistors, you must set pull high/low resistors correctly to prevent electrical signal corruption. No universal set of resistor values works in all environments. The NPort 5100 device servers include jumpers for adjusting termination and pull high/low resistor values for each serial port.
You can configure NPort 5100 device servers for TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode. This ensures compatibility with software based on standard network APIs (e.g., Winsock or BSD Sockets).
The Real COM/TTY drivers included with NPort 5100 device servers let you continue using software designed for COM/TTY port communication. Installation and configuration are painless. Your serial devices and PC communicate seamlessly over a TCP/IP network. Using Moxa’s Real COM/TTY drivers preserves your software investment while allowing you to enjoy the benefits of networking your serial devices.
NPort 5100 device servers support SNMP for monitoring all units over Ethernet. You can configure each unit to send trap messages automatically to the SNMP manager when user-defined errors occur. Users without SNMP managers can receive email alerts instead. Define alert triggers using Moxa’s Windows utility or the web console. For example, alerts can trigger from warm starts, cold starts, or password changes.
