PT-G7728 Series

Features and Benefits

  • IEC 61850-3 Edition 2 Class 2 compliant for EMC
  • Wide operating temperature range: -40 to 85°C (-40 to 185°F)
  • Hot-swappable interface and power modules for continuous operation
  • IEEE 1588 hardware time stamp supported
  • Supports IEEE C37.238 and IEC 61850-9-4 power profiles
  • IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
  • GOOSE Check for easy troubleshooting
  • Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA

Models

  • PT-G7728

Overview

How to Buy

Click “WhatsApp Us” or “Get a Quote” above to buy PT-G7728 Series from APulsar Technologies, MOXA official distributor.

Purchase from our office in Petaling Jaya, or order online and enjoy fast delivery across Kuala Lumpur and the entire Malaysia.

Introduction

The PT-G7728 Series modular switches provide up to 28 Gigabit ports, including 4 fixed ports, 6 interface module slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The PT-G7728 Series is designed to meet evolving network requirements, featuring a hot-swappable module design that enables you to change, add, or remove modules without having to shut down the switch.

Multiple types of interface modules (RJ45, SFP, PoE, PRP/HSR) and power units (24/48 VDC, 110/220 VAC/VDC) provide even greater flexibility to suit different operating conditions. The PT-G7728 Series complies with the IEC 61850-3 Edition 2 Class 2 standard to ensure reliable data transmissions when the device is subjected to high levels of EMI, shock, or vibration.

Specifications

Ethernet Interface

10/100/1000BaseT(X) Ports (RJ45 connector)

  • 2

100/1000BaseSFP Ports

  • 2

Module

  • 6

Slot Combination

  • See the LM-7000H datasheet for information about the Ethernet, PoE+, and PRP/HSR modules.

Standards

  • IEEE 802.3 for 10BaseT
  • IEEE 802.3u for 100BaseT(X) and 100BaseFX
  • IEEE 802.3ab for 1000BaseT(X)
  • IEEE 802.3z for 1000BaseX
  • IEEE 802.1D-2004 for Spanning Tree Protocol
  • IEEE 802.1w for Rapid Spanning Tree Protocol
  • IEEE 802.1p for Class of Service
  • IEEE 802.1Q for VLAN Tagging
  • IEEE 802.1X for authentication
  • IEEE 802.3ad for Port Trunk with LACP
  • IEEE 802.3x for flow control

Management

  • IPv4/IPv6
  • SNMP Inform
  • SNMPv1/v2c/v3
  • DHCP Server/Client
  • DHCP Option 66/67/82
  • BOOTP
  • TFTP
  • LLDP
  • RARP
  • HTTP
  • HTTPS
  • Telnet
  • Flow control
  • Back Pressure Flow Control
  • Port Mirror
  • Fiber check
  • Dying Gasp
  • SMTP
  • Syslog

MIB

  • MIB-II
  • Ethernet-like MIB
  • Bridge MIB
  • P-BRIDGE MIB
  • Q-BRIDGE MIB
  • RSTP MIB
  • RMON MIB Groups 1, 2, 3, 9

Filter

  • 802.1Q
  • GMRP
  • GVRP
  • IGMP v1/v2/v3
  • QinQ VLAN

Redundancy Protocols

  • Link Aggregation
  • MSTP
  • RSTP
  • STP
  • Turbo Chain
  • Turbo Ring v1/v2
  • V-ON
  • MRP

Security

  • RADIUS
  • TACACS+
  • SSH
  • Port Lock
  • Broadcast storm protection
  • MAB authentication
  • Sticky MAC
  • Access control list

Time Management

  • NTP Server/Client
  • SNTP
  • IEEE 1588v2 PTP (hardware-based)

Power Substation

  • IEC 61850 QoS
  • GOOSE Check

Industrial Protocols

  • EtherNet/IP
  • Modbus TCP

Priority Queues

  • 8

Max. No. of VLANs

  • 256

VLAN ID Range

  • VID 1 to 4094

IGMP Groups

  • 4096

MAC Table Size

  • 16 K

Packet Buffer Size

  • 12 Mbits

Jumbo Frame Size

  • 9.6 KB

Console Port

  • RS-232 (RJ45)

Storage Port

  • USB Type A

Input Voltage

  • With PWR-HV-P48 installed:
    110/220 VDC/VAC for the switch system
    48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)
  • With PWR-LV-P48 installed:
    24/48 VDC for the switch system
    48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)
  • With PWR-HV-NP installed:
    110/220 VDC/VAC for the switch system
  • With PWR-LV-NP installed:
    24/48 VDC for the switch system

Operating Voltage

  • With PWR-HV-P48 installed:
    88 to 300 VDC, 90 to 264 VAC for the switch system
    46 to 57 VDC for PoE systems
  • With PWR-LV-P48 installed:
    18 to 72 VDC for the switch system
    46 to 57 VDC for PoE systems
  • With PWR-HV-NP installed:
    88 to 300 VDC, 90 to 264 VAC for the switch system
  • With PWR-LV-NP installed:
    18 to 72 VDC for the switch system

Input Current

  • With PWR-HV-P48 installed:
    PWR input current (switch system)
    Max. 0.11 A @ 110 VDC
    Max. 0.06 A @ 220 VDC
    Max. 0.29 A @ 110 VAC
    Max. 0.18 A @ 220 VAC
    EPS input current (PoE system)
    Max. 0.53 A @ 48 VDC
    (excluding power consumption of PoE devices)
  • With PWR-LV-P48 installed:
    PWR input current (switch system)
    Max. 0.53 A @ 24 VDC
    Max. 0.28 A @ 48 VDC
    EPS input current (PoE system)
    Max. 0.53 A @ 48 VDC
    (excluding power consumption of PoE devices)
  • With PWR-HV-NP installed:
    PWR input current (switch system)
    Max. 0.11 A @ 110 VDC
    Max. 0.06 A @ 220 VDC
    Max. 0.29 A @ 110 VAC
    Max. 0.18 A @ 220 VAC
  • With PWR-LV-NP installed:
    PWR input current (switch system)
    Max. 0.53 A @ 24 VDC
    Max. 0.28 A @ 48 VDC

IP Rating

  • IP30

Dimensions

  • 443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in)

Weight

  • 3080 g (6.8 lb)

Installation

  • 19-inch rack mounting

Operating Temperature

  • -40 to 85°C (-40 to 185°F)

Storage Temperature (package included)

  • -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

  • 5 to 95% (non-condensing)

EMC

  • EN 55032/35

EMI

  • CISPR 32, FCC Part 15B Class A

EMS

  • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
  • IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
  • IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
  • IEC 61000-4-6 CS: 10 V
  • IEC 61000-4-8 PFMF

Power Substation

  • IEC 61850-3 Edition 2 Class 2 (EMC)
  • IEEE 1613

Railway

  • EN 50121-4

Safety

  • UL 62368-1
  • IEC 62368-1

Time

  • 449,542 hrs

Standards

  • Telcordia (Bellcore)
  • GB

Warranty Period

  • 5 years
Open chat
Hello 👋
Can we help you?