Contact Us

Nport 5600-DT Series

Features and Benefits

  • 8 serial ports supporting RS-232/422/485
  • Compact desktop design
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel
  • Configure by Telnet, web browser, or Windows utility
  • Socket modes: TCP server, TCP client, UDP, Real COM
  • SNMP MIB-II for network management
WhatsApp Us
Get Quote Get Quote
Download Datasheet Download Datasheet

Overview

NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.

Convenient Design for RS-485 Applications

  • The NPort 5650-8-DT device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs

  • The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adapter.

LED Indicators to Ease Your Maintenance Tasks

  • The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Two Ethernet Ports for Convenient Cascade Wiring

  • The NPort 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)

  • 2

Magnetic Isolation Protection

  • 1.5 kV (built-in)

Configuration Options

  • Serial Console
  • Telnet Console
  • Web Console (HTTP/HTTPS)
  • Windows Utility

Management

  • ARP
  • BOOTP
  • DHCP Client
  • DNS
  • HTTP
  • HTTPS
  • ICMP
  • IPv4
  • LLDP
  • Rtelnet
  • SMTP
  • SNMPv1/v2c
  • TCP/IP
  • Telnet
  • UDP

Filter

  • IGMP v1/v2

Windows Real COM Drivers

  • Windows 11/10/8.1/8/7/Vista/XP/ME/98/95
  • Windows Server 2022/2019/2016/2012 R2/2012/2008 R2/2008/2003
  • Windows Embedded CE 6.0/5.0, Windows XP Embedded

Linux Real TTY Drivers

  • Kernel versions 6.x, 5.x, 4.x, 3.x, 2.6.x, and 2.4.x

Fixed TTY Drivers

  • macOS Versions: 11.x, 10.12 to 10.15

  • SCO UNIX, SCO OpenServer, SCO UnixWare 7, Sun Solaris 10, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

Arm®-based Platform Support

  • Linux Kernel 5.x/4.x

Virtual Machine

  • VMWare ESXi (Windows 11/10)
  • VMware Fusion (Windows on macOS 10.12 to 11.x)
  • Parallels Desktop (Windows on macOS 10.12 to 11.x)

Android API

  • Android 3.1.x and later

Time Management

  • SNTP

MIB

  • RFC1213
  • RFC1317

Authentication

  • Local database 

Encryption

  • HTTPS
  • AES-128
  • RSA-1024
  • SHA-1
  • SHA-256

Security Protocols

  • HTTPS (TLS 1.2)
  • SNMPv3

Connector

8-pin RJ45:

  • NPort 5610-8-DT-J/5650-8-DT-J

DB9 male:

  • NPort 5610-8-DT models/NPort 5650-8-DT models/NPort 5650I-8-DT models

No. of Ports

  • 8 

Serial Standards

  • NPort 5610-8-DT Models: RS-232
  • NPort 5650-8-DT Models: RS-232/422/485

Baudrate

  • Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k

Data Bits

  • 5, 6, 7, 8

Stop Bits

  • 1, 1.5, 2

Parity

  • None, Even, Odd, Space, Mark

Flow Control

  • RTS/CTS
  • DTR/DSR
  • XON/XOFF

Pull High/Low Resistor for RS-485

  • 1 kilo-ohm
  • 150 kilo-ohms

Terminator for RS-485

  • 120 ohms

RS-485 Data Direction Control

  • Automatic Data Direction Control (ADDC)

Isolation

  • -I models: 2 kV

Surge

  • 0.5 kV

Console Port

  • RS-232 (TxD, RxD, GND), 3-pin (19200, n, 8, 1)

RS-232

  • TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

  • Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w

  • Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

  • Data+, Data-, GND

Input Current

  • NPort 5610-8-DT/NPort 5610-8-DT-J/
    NPort 5610-8-DT-T:
    611 mA @ 12 VDC

  • NPort 5650-8-DT/NPort 5650-8-DT-J/
    NPort 5650-8-DT-T:
    615 mA @ 12 VDC

  • NPort 5650I-8-DT/NPort 5650I-8-DT-T:
    1066 mA @ 12 VDC

No. of Power Inputs

 
  • 2

Input Voltage

  • 12 to 48 VDC

Reverse Polarity Protection

  • Supported

Source of Input Power

  • TB
  • Power input jack

Automatic Reboot Trigger

  • Built-in WDT

Alert Tools

  • Built-in buzzer and RTC (real-time clock)

Housing

  • Metal

Installation

  • Desktop
  • DIN-rail mounting (with optional kit)
  • Wall mounting (with optional kit)

Dimensions (with ears)

  • 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)

Dimensions (without ears)

  • 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)

Dimensions (with DIN-rail kit on bottom panel)

  • 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)

Weight

  • NPort 5610-8-DT: 1,570 g (3.46 lb)
  • NPort 5610-8-DT-J: 1,520 g (3.35 lb)
  • NPort 5610-8-DT-T: 1,320 g (2.91 lb)
  • NPort 5650-8-DT: 1,590 g (3.51 lb)
  • NPort 5650-8-DT-J: 1,540 g (3.40 lb)
  • NPort 5650-8-DT-T: 1,340 g (2.95 lb)
  • NPort 5650I-8-DT: 1,660 g (3.66 lb)
  • NPort 5650I-8-DT-T: 1,410 g (3.11 lb)

Interactive Interface

  • LCD panel display (standard temp. models only)
  • Push buttons for configuration (standard temp. models only)

Operating Temperature

  • Standard Models: 0 to 55°C (32 to 140°F)
  • Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

  • -40 to 75°C (-40 to 167°F)

Ambient Relative Humidity

  • 5 to 95% (non-condensing)

EMC

  • EN 55032/35

EMI

  • CISPR 32, FCC Part 15B Class A

EMS

  • IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
  • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
  • IEC 61000-4-4 EFT: Power: 2 kV; Signal: 0.5 kV
  • IEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kV
  • IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
  • IEC 61000-4-8 PFMF
  • IEC 61000-4-11

Safety

  • UL 60950-1
  • IEC 62368-1

Green Product

  • RoHS
  • CRoHS
  • WEEE

Time

  • 836,374 hrs

Standards

  • Telcordia (Bellcore) Standard

Warranty Period

  • 5 years

Models

Facebook
Quick Links
Solutions
  • Industrial Network
  • Industrial Edge Connectivity
  • ICS Cybersecurity
  • Industrial Computer & Panel
  • UPS & Data Center Infrastructure
  • Clean Energy
Stay up to date


    ©2025. APulsar Technologies Sdn. Bhd. (201601038828 / 1209769-W). Website Design by VeecoTech.
    • Terms
    • Privacy
    • Cookies