Contact Us

MGate 5111 Series

Features and Benefits

  • Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
  • Supports PROFIBUS DP V0 slave
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports EtherNet/IP Adapter
  • Supports PROFINET IO device
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • Status monitoring and fault protection for easy maintenance
  • microSD card for configuration backup/duplication and event logs
  • Supports redundant dual DC power inputs and 1 relay output
  • Serial port with 2 kV isolation protection
  • -40 to 75°C wide operating temperature models available
  • Security features based on IEC 62443
WhatsApp Us
Get Quote Get Quote
Download Datasheet Download Datasheet

Overview

MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.

Modbus is one of the most widely used industrial communication protocols, and EtherNet/IP, PROFINET, and PROFIBUS are commonly used in factory automation and process automation. The MGate 5111 supports both Modbus RTU/ASCII/TCP master and slave modes, so that you can easily connect your Modbus device to PROFIBUS PLCs or DCSs, such as Siemens PLCs.

For system integration, the MGate 5111 can connect to EtherNet/IP PLC/SCADA systems, such as Rockwell Automation PLCs, to PROFIBUS PLC/DCS systems, or between a new Siemens PLC system that supports PROFINET to an existing PROFIBUS system. The MGate 5111 gateways are designed for easy configuration and quick maintenance. A handy web console can be used to implement remote maintenance tasks, and the configuration wizard UI lets you quickly set up your gateway. A comprehensive collection of troubleshooting tools reduce configuration time and system downtime. The rugged design is suitable for industrial applications, such as factory automation, power, oil and gas, water and wastewater, and other process automation industries.

Easy Configuration

  • The MGate 5111 Series has a user-friendly interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consuming tasks in which users had to implement detailed parameter configurations one by one. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps.
  • The MGate 5111 supports a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, system monitoring functions are provided to record network connections and system log events.

A Variety of Maintenance Functions

  • The MGate 5111 supports Protocol Diagnose and Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues caused by incorrect software parameters, such as slave IDs and register addresses, or incorrect command configurations, can be fished out with Protocol Diagnose and Traffic Monitoring, which let you capture and check data to easily identify root causes.
  • MGate 5111 gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators. When a PROFIBUS cable gets disconnected, the fault protection function executes actions on end devices identified by a predefined value set by the user.

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)

  • 2
  • Auto MDI/MDI-X connection

Magnetic Isolation Protection

  • 1.5 kV (built-in)

Industrial Protocols:

  • Modbus TCP Client (Master)
  • Modbus TCP Server (Slave)
  • PROFINET IO Device
  • EtherNet/IP Adapter

Configuration Options:

  • Web Console (HTTP/HTTPS)
  • Device Search Utility (DSU)
  • Telnet Console

Management:

  • ARP
  • DHCP Client
  • DNS
  • HTTP
  • HTTPS
  • SMTP
  • SNMP Trap
  • SNMPv1/v2c/v3
  • TCP/IP
  • Telnet
  • SSH
  • UDP
  • NTP Client

MIB:

  • RFC1213
  • RFC1317

Time Management:

  • NTP Client 

Console Port

  • RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

No. of Ports

  • 1

Connector

  • DB9 male

Serial Standards

  • RS-232/422/485

Baudrate

  • 50 bps to 921.6 kbps

Data Bits

  • 7, 8

Parity

  • None
  • Even
  • Odd
  • Space
  • Mark

Stop Bits

  • 1, 2

Flow Control

  • RTS Toggle (RS-232 only)
  • RTS/CTS

RS-485 Data Direction Control

  • Automatic Data Direction Control (ADDC)

Pull High/Low Resistor for RS-485

  • 1 kilo-ohm
  • 150 kilo-ohms

Terminator for RS-485

  • 120 ohms

Isolation

  • 2 kV (built-in)

RS-232

  • TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

  • Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

  • Data+, Data-, GND

RS-485-4w

  • Tx+, Tx-, Rx+, Rx-, GND

Configuration Options

  • Serial Console

Industrial Protocols

  • PROFIBUS DP-V0 Slave
  • Modbus RTU/ASCII Master
  • Modbus RTU/ASCII Slave

Mode

  • Master
  • Slave

Functions Supported

  • 1, 2, 3, 4, 5, 6, 15, 16, 23

Max. No. of Commands

  • 128

Input Data Size

  • 2048 bytes

Output Data Size

  • 2048 bytes

Mode

  • Client (Master)
  • Server (Slave)

Functions Supported

  • 1, 2, 3, 4, 5, 6, 15, 16, 23

Max. No. of Client Connections

  • 16

Max. No. of Server Connections

  • 32

Max. No. of Commands

  • 128

Input Data Size

  • 2048 bytes

Output Data Size

  • 2048 bytes

Industrial Protocols

  • PROFIBUS DP

No. of Ports

  • 1

Connector

  • DB9 female

Baudrate

  • 9600 bps to 12 Mbps

Isolation

  • 2 kV (built-in)

Signals

  • PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V

Rotary Switch

  • PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration)

Mode

  • DP-V0 Slave

Max. No. of Master Connections

  • 1

Max. No. of PROFIBUS I/O Modules

  • 24

Input Data Size

  • 244 bytes

Output Data Size

  • 244 bytes

Mode

  • IO Device

Max. No. of IO Controller Connections

  • 1 (for read/write)

Input Data Size

  • 512

Output Data Size

  • 512

Mode

  • Adapter

CIP Objects Supported

  • Identity
  • Message Router
  • Assembly
  • Connection Manager
  • TCP/IP interface
  • Ethernet link
  • Port

Max. No. of Scanner Connections

  • 1 (for read-only)
  • 1 (for read/write)

Input Data Size

  • 496 bytes

Output Data Size

  • 496 bytes

microSD Slot

  • Up to 32 GB (SD 2.0 compatible)

Input Voltage

  • 12 to 48 VDC

Input Current

  • 416 mA @ 12 VDC

Power Connector

  • Spring-type Euroblock terminal

Contact Current Rating

  • Resistive load: 2 A @ 30 VDC

Housing

  • Metal

IP Rating

  • IP30

Dimensions

  • 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)

Weight

  • 589 g (1.30 lb)

Operating Temperature

  • MGate 5111: 0 to 60°C (32 to 140°F)
  • MGate 5111-T: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

  •  -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

  • 5 to 95% (non-condensing)

EMC

  • EN 61000-6-2/-6-4

EMI

  • CISPR 32, FCC Part 15B Class A

EMS

  • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  • IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  • IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
  • IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
  • IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
  • IEC 61000-4-8 PFMF

Safety

  • EN 62368-1
  • UL 61010-2-201

Hazardous Locations

  • ATEX
  • Class I Division 2
  • IECEx

Freefall

  • IEC 60068-2-32

Shock

  • IEC 60068-2-27

Vibration

  • IEC 60068-2-6
  • IEC 60068-2-64

Time

  • 718,131 hrs

Standards

  • Telcordia SR332

Warranty Period: 

  • 5 years

Models

Facebook
Quick Links
Solutions
  • Industrial Network
  • Industrial Edge Connectivity
  • ICS Cybersecurity
  • Industrial Computer & Panel
  • UPS & Data Center Infrastructure
  • Clean Energy
Stay up to date


    ©2025. APulsar Technologies Sdn. Bhd. (201601038828 / 1209769-W). Website Design by VeecoTech.
    • Terms
    • Privacy
    • Cookies